KTF/Uniforms

From MFIWiki
Jump to: navigation, search
Ktf logo sm.jpg
KTF Directory

Commktf.jpg

 

KmoghjIH1.jpg MIgh.gif Antonia.jpg

The MFI Klingon Uniform Standards:
Last updated: 05 November 2005

The basis of the KTF uniform is the basic uniforms as seen In the multiple Star Trek series and Movies. These uniforms are composed of a top (hereafter called a “tunic‿), pants, shoes, ridges, sash, armor, gloves, bracers, and the appropriate insignias that indicate rank, academy honors (courses completed), post held, affiliations. Uniform Tunics may be purchased or hand manufactured, as falls to the discretion of the owner. It must be stressed that owning/wearing a standard uniform is NOT a membership requirement of MFI, nor the KTF… but it is encouraged for the sense of unity and identity that it brings. Besides…It looks extremely cool and intimidating at conventions!

**NOTE**

Traditional Klingon Insignia and Badges (i.e. Arm badges, cloak pins, Homeworld service pins…etc.) may be worn in their correct and appropriate locations.

 

Command Cloaks are ONLY supposed to be worn by ship’s Commanding  Officers, or those at or above the rank of Captain / Colonel. 

 

It is requested that you not wear Klingon awards that have not been awarded to you by the Command Council of the KTF.

 

*PLEASE NOTE: This is not LAW ! it is only meant as a guideline. Also note at the end are general additions to this document.


Dress Uniform: Imperial Klingon Uniform A

Headgear : Head Ridges and /or Wig (unless you already posses long enough hair) as per your character.

Tunic: Black or Grey are the standard turtleneck or jersey color to be worn

 

Armor: Tradition Grey on Black armor is to be worn.  Only Command Council members may wear black on black armor.

 

Gloves and Bracers: Black, fingerless gloves, with some variety of spike or claw on the back side over the third knuckle.  Bracers should be of a dark color, black preferred, with a 4-5 letter word in Klingon in Gold or Silver on the front of each one. Word may be anything accept a curse, swear, profanity, or hate related; it should be a word that means something to the wearer.

 

Pants: Black or Grey slacks/pants (Black BDU Pants are Best).

 

Footwear: Combat or Black Rubber boots recommended, though Black shoes can be worn. Toe Spike is preferred, but not mandatory.  No tennis/athletic shoes please.

 

Insignia: Rank insignias will be worn on the wearer’s right collar or gorget. Insignia indicating a branch activity (KTF/Fleet/Marine) will be worn on the wearers left collar or gorget, a Maquis Pin may also be worn on the left collar or gorget instead of the branch activity. Insignia/Rank pins are to be centered between top and bottom of collar or gorget, and spaced 1 inch back from the leading edge of the collars vertical edge, or 1-2 inches back from the front center seam of the gorget.

 


Trimming and Sash: Uniform sash trimming is mandatory (or at least highly encouraged) for all KTF members, using the following guidelines.

 

Black Sash: KTF Command

Black Trim: KTF Command

Green Trim: Dual Service in MFI Marines

Red Trim: Dual Service in MFI Fleet

Red Sash: Diplomatic Corp

Yellow Trim: Diplomatic Corp

Blue Trim: Dual Service in MFI Special Operations Command

Maroon Trim: Dual Service in MFI Special Security Division

Blue Sash: Medical Corp

 

Trimming is usually on the edges of the sash, but it can also be a 1 inch stripe of the appropriate color running the width of the sash, 2 inches below the right shoulder, on the front.

 

If using a metal sash (Chainmail or other wise), or a colored sash of other design; as long as it will not confuse or mislead on area of service is acceptable. Appropriately colored ribbon may be interwoven in the chainmail to indicate area of service.  It is recommended that minimum sash width be 3‿ and maximum be 6‿, but these are flexible guidelines.

 

Additions:

1- Arm patches (optional) of the MFI Maquis symbol, or MFI Klingon Task Force symbol will be placed on tunics/shirts arm, ½ inch below left shoulder seam, and centered.

 

2-Ribbons, and wings are best worn on the sash beginning 3 inches from shoulder seam (or the approximate location of one)

 

3-Prop equipment - such tricorders, medkits, etc., etc. are not authorized for wear with the Dress Uniform.

*prop DaQ’Tagh or Disruptor can be worn.

 

4-KTF Comm-badge or Klingon Imperial Comm-badge are best worn, either on the left shoulder, ½ inch below the sleeve seam, or in the top 3 inches of Sash space.

 

5- Arm patch or badge (optional) of the Warrior’s House Insignia will be placed on tunics/shirts arm, ½ inch below right shoulder seam, and centered. It may also be placed on the Battle Sash as the first prominent item.

 

Additional Notations: Black Web Belt with gold or black Buckle is authorized as well as black Pistol Belt. Can also be black leather belt with traditional Klingon Buckle (5 nubs for a Male, 4 nubs for a Female)

 


Dress Uniform: Klingon - Fusion Uniform A

Headgear : Wig or Hair as per your character or personae.

Tunic: Black or Grey are the standard turtleneck or jersey color to be worn

 

Armor: Gold or yellow Mesh vest.

 

Pants: Black slacks/pants (Black BDU Pants are Best).

 

Footwear: Combat or Black Rubber boots recommended, though Black shoes can be worn.  No tennis/athletic shoes please.

 

Insignia: Rank insignias will be worn on the wearer’s right collar. Insignia indicating a branch activity (KTF/Fleet/Marine) will be worn on the wearers left collar, a Maquis Pin may also be worn on the left collar instead of the branch activity. Insignia/Rank pins are to be centered between top and bottom of collar or gorget, and spaced 1 inch back from the leading edge of the collars vertical edge.

 

Trimming and Sash: Uniform sash trimming is mandatory (or at least highly encouraged) for all KTF members, using the following guidelines.

 

Black Sash: KTF Command

Black Trim: KTF Command

Green Trim: Dual Service in MFI Marines

Red Trim: Dual Service in MFI Fleet

Red Sash: Diplomatic Corp

Yellow Trim: Diplomatic Corp

Blue Trim: Dual Service in MFI Special Operations Command

Maroon Trim: Dual Service in MFI Special Security Division

Blue Sash: Medical Corp

 

Trimming is usually on the edges of the sash, but it can also be a 1 inch stripe of the appropriate color running the width of the sash, 2 inches below the right shoulder, on the front.

 

If using a metal sash (Chainmail or other wise), or a colored sash of other design; as long as it will not confuse or mislead on area of service is acceptable. Appropriately colored ribbon may be interwoven in the chainmail to indicate area of service. 
It is recommended that minimum sash width be 3‿ and maximum be 6‿, but these are flexible guidelines.

 

 

Additions:

1- Arm patches (optional) of the MFI Maquis symbol, or MFI Klingon Task Force symbol will be placed on tunics/shirts arm, ½ inch below left shoulder seam, and centered.

 

2-Ribbons, and wings are best worn on the sash beginning 3 inches from shoulder seam (or the approximate location of one)

 

3-Prop equipment - such tricorders, medkits, etc., etc. are not authorized for wear with the Dress Uniform.

*prop DaQ’Tagh or Disruptor can be worn.

 

4-KTF Comm-badge or Klingon Imperial Comm-badge are best worn, either on the left shoulder, ½ inch below the sleeve seam, or in the top 3 inches of Sash space.

 

5- Arm patch or badge (optional) of the Warrior’s House Insignia will be placed on tunics/shirts arm, ½ inch below right shoulder seam, and centered. It may also be placed on the Battle Sash as the first prominent item.

 

Additional Notations: Black Web Belt with gold or black Buckle is authorized as well as black Pistol Belt. Can also be black leather belt with traditional Klingon Buckle (5 nubs for a Male, 4 nubs for a Female)

 


Duty Uniform B – Basics to be Recognized as a Klingon:

Tunic: Normal civilians black shirt. MFI BDU Shirt may also be worn. If MFI BDU Shirt is worn it is highly recommended that the Klingon Warrior's name be embroidered above the left pocket.

 

Pants: Black pants.

 

Footwear: Black footwear, either combat boots or regular shoes. tennis/athletic shoes authorized.

 

Headgear: Either none or Ridges appropriate to personae.

 

Insignia: Rank insignias will be worn on the wearer’s right collar. Insignia indicating a branch activity (KTF/Fleet/Marine) will be worn on the wearers left collar, a Maquis Pin may also be worn on the left collar instead of the branch activity. Insignia/Rank pins are to be centered between top and bottom of collar or gorget, and spaced 1 inch back from the leading edge of the collars vertical edge.

 

Trimming and Sash: Uniform sash trimming is mandatory (or at least highly encouraged) for all KTF members, using the following guidelines.

 

Black Sash: KTF Command

Black Trim: KTF Command

Green Trim: Dual Service in MFI Marines

Red Trim: Dual Service in MFI Fleet

Red Sash: Diplomatic Corp

Yellow Trim: Diplomatic Corp

Blue Trim: Dual Service in MFI Special Operations Command

Maroon Trim: Dual Service in MFI Special Security Division

Blue Sash: Medical Corp

 

Trimming is usually on the edges of the sash, but it can also be a 1 inch stripe of the appropriate color running the width of the sash, 2 inches below the right shoulder, on the front.

 

If using a metal sash (Chainmail or other wise), or a colored sash of other design; as long as it will not confuse or mislead on area of service is acceptable. Appropriately colored ribbon may be interwoven in the chainmail to indicate area of service. 
It is recommended that minimum sash width be 3‿ and maximum be 6‿, but these are flexible guidelines.

 

 

Additions:

1- Arm patches (optional) of the MFI Maquis symbol, or MFI Klingon Task Force symbol will be placed on tunics/shirts arm, ½ inch below left shoulder seam, and centered.

 

2-Ribbons, and wings are best worn on the sash beginning 3 inches from shoulder seam (or the approximate location of one)

 

3-Prop equipment - such tricorders, medkits, etc., etc. are not authorized for wear with the Dress Uniform.

*prop DaQ’Tagh or Disruptor can be worn.

 

4-KTF Comm-badge or Klingon Imperial Comm-badge are best worn, either on the left shoulder, ½ inch below the sleeve seam, or in the top 3 inches of Sash space.

 

5- Arm patch or badge (optional) of the Warrior’s House Insignia will be placed on tunics/shirts arm, ½ inch below right shoulder seam, and centered. It may also be placed on the Battle Sash as the first prominent item.

 

Additional Notations: Black Web Belt with gold or black Buckle is authorized as well as black Pistol Belt. Can also be black leather belt with traditional Klingon Buckle (5 nubs for a Male, 4 nubs for a Female)

 

 

Klingon Costume1.JPG

from http://www.madwulf.com/OGAMCostume.htm


Ahubduty.jpg Chrega1.jpg

Instructions on making a Chancellor's coat.

Coatg.jpg Bcoatg.jpg

Incoat.jpg Gsleev10.jpg

Chansle.jpg


return KTF Main Page
LFrench 14:34, 28 December 2009 (EST)
Cbs-para2.jpg Star Trek®,StarTrek.com, Star Trek: The Next Generation®, Star Trek: Deep Space Nine®, Star Trek: Voyager®, and Enterprise® are registered trademarks of CBS Paramount Television & Viacom. All material found on these pages are for promotional purposes only. No infringements on their copyright is intended. These are Star Trek Fan Pages.

Personal tools